johnstepien
Active Member
- Joined
- Jan 7, 2014
- Messages
- 36
Updated my Savage 12 ga. sluggun. Here is what I did..
Hated the flex in the forend of the stock. I used a dremel and cut slots through the ribs in the forend. Then I took hunting arrow cut to fit and epoxied in. Also used the epoxy to fill some of the voids in front of the action lug. Then installed a Timney trigger. Personal choice.
I epoxied an Edwards recoil reducer into the top of the rear stock. Then filled the back of the stock with an expandable foam. Pulled the action and sent to Magna port for porting of the end of the barrel. Added an over size bolt handle. The gun shoots 3 inch Accutip tight out to 200 yards.
The recoil has been considerably reduced. Very happy with it.