• If you are being asked to change your password, and unsure how to do it, follow these instructions. Click here

rum to wsm barrel swap?

den

Well-Known Member
Joined
Nov 25, 2007
Messages
410
Location
Oregon
does anybody know if it works well to switch a wsm barrel onto a factory 7 rum bdl setup? would feeding be acceptable just a barrel change by a gunsmith and no other modifications? thanks
 
You will probably need a center feed magazine because you are putting a short cartridge in a long action and the feed rails and follower are for a longer case. The case will pop out before it is far enough in to the barrel.
 
thanks for the reply lhouston78 that is the type of worries I have really only wanted to do this if it was pretty inexpensive since gun shoots good as is
 
Warning! This thread is more than 11 years ago old.
It's likely that no further discussion is required, in which case we recommend starting a new thread. If however you feel your response is required you can still do so.
Top