Reloading

I have just re-barreled my 22-250 to a 22-250 AI
This barrel has a 1 in 8 twist.
Can anyone help with reloading ??
Want to shot 60 gr bullets and heavier
I have just re-barreled my 22-250 to a 22-250 AI
This barrel has a 1 in 8 twist.
Can anyone help with reloading ??
Want to shot 60 gr bullets and heavier
Nosler manual has load recipes. This is what I found online. Something to consider? Heard on a new barrel to start minimum and work up??
 

Attachments

  • 05F6AAF2-07CB-41A3-B6B2-31B8093BAA7D.png
    05F6AAF2-07CB-41A3-B6B2-31B8093BAA7D.png
    254.1 KB
It was just a pun, over bored cartridges are known to be throat burners. But 5000 FPS is insane. When the 220 Swift came out bullets were not up to snuff and some came to pieces before impact with the target.
Although the 22-243 can run 35gr-40gr bullets over 5,000 ft/sec, I liked to run my AI variant with a 75gr moly bullet at 3,670 ft/sec. That load shot (once) into .65" at 600 yds. It was feared by PA groundhogs. Shots out to 1,000yds were fatal.
 
5K is amazing! I get 4350Fps with my 223WSSM and 40 grain B-tips and I thought that was pretty fast... At 200 yards you get red mist seen before the gun jumps off the rat and it seems to happen before the report gets to your ear. It's like a wrinkle in the time/space continuum.(SP?)
 
I do have loads, that I developed in a 27" inch barreled .22-250 AI with a 1-7 twist barrel using Berger and Sierra 80gr match bullets. All my loads were very safe in my rifle and they showed no signs of pressure if you're interested I'll forward a few of the most accurate loads to you.
Yes Sir: that would be a great help
 
I do have loads, that I developed in a 27" inch barreled .22-250 AI with a 1-7 twist barrel using Berger and Sierra 80gr match bullets. All my loads were very safe in my rifle and they showed no signs of pressure if you're interested I'll forward a few of the most accurate loads to you.
If you would post here or send to my email: [email protected] Many thanks
 
Back
Top