Reload data needed

dave1

Well-Known Member
Joined
Jul 6, 2008
Messages
229
Location
pa
I need load data for 50 grn v-max. I will be using h-322 could someone please look in your book and give me specs.

I am trying to find somewhere that list data for different types of bullets ranging from 55 grn and down to 40. I have some sites now but they arent telling me things I need!.
I also have some hornady spsx , I need info for those also,
 
I need load data for 50 grn v-max. I will be using h-322 could someone please look in your book and give me specs.

I am trying to find somewhere that list data for different types of bullets ranging from 55 grn and down to 40. I have some sites now but they arent telling me things I need!.
I also have some hornady spsx , I need info for those also,


I don't have books with me, but I ran some info for you from Quickload. The following info is for H-322 and a cartridge length of 2.260. The 223 Remington has 2 distinct pressure standards. The SAAMI standard is 55,000psi and the Remington Standard is 62,366psi. I believe the SAAMI spec is for semi-auto rifles and the remington standard is for strong bolt action recently produced rifles. (if I'm wrong on this, someone please let us know). Keep this in mind when looking at the following info.

223loadfromqload.jpg



AJ
 
My lyman book says to trim cases to 1.750. I trimed cases. I looked at loading a 45 grain sierra soft point (hornet). the hodgton websites says ... If I seat the bullet to only 2.240 it looks like the bullets barly in there?

I load multible calibers. Am I not seeing something? Or is it because I trimmed to 1.750

45 GR. SIE SP Hodgdon H322 .224" 2.240" 23.0 3164 36,000 CUP 25.0 3424 47,400 CUP
 
Warning! This thread is more than 16 years ago old.
It's likely that no further discussion is required, in which case we recommend starting a new thread. If however you feel your response is required you can still do so.

Recent Posts

Top