emmagator
Well-Known Member
I would like to tune my scale myself, anyone know of any information on diy tuning?
I would like to tune my scale myself, anyone know of any information on diy tuning?
No. not new, my fathers old scale probably from the 80's. I bought some RCBS certified weights and the scale is innacurate according to the weights i bought.If it a new scale , follow the directions.
There should be a brass weight that came with it,
you use that to tune the scale.gun)gun)
I zero the scale, I've cleaned and checked pivots. My issue is when I put on 50 grains of my test weights, it doesn't measure 50grains
Ok so i did as suggested and adjusted the lead shot in the hanger until my 50 grains of test weight zeroed out. So now i have a little more confidence when weighing. thanks for the help.
It zeros to pretty dang close!Now when you take the test weight off and set the scale to ZERO, both adjusters, does it still balance? It should!
If not and you have verified the weight of the Test Weight, there is still a problem some where.
Dave
It zeros to pretty dang close!