Quick load?
- Thread starter coop2564
- Start date
Help Support Long Range Hunting Forum
Barrelnut
Well-Known Member
It's a cartridge load simulator for Windows. It's not an app.
http://www.neconos.com/details3.htm
http://www.neconos.com/details3.htm
Bigeclipse
Well-Known Member
- Joined
- Aug 10, 2012
- Messages
- 1,967
thanks as well. Not to hijack the thread but why would someone want to pay for that? Just curious...does it really save time trying to find an accurate load for a rifle? It seems like it can "guess" accuracy nodes? If so, does it come close? I am not a competition shooter nor am I longrangehunter but I do reload and I do try to get decent accuracy. For me if it is an off the rack rifle sub 1 MOA is all I really need in a load but when I get bored I do not mind doing OCW tests and such.
adam32
Well-Known Member
I use it for finding max pressures with multiple powders and seeing which will give the highest velocity before just burning powder.
It has multiple uses tho.
It has multiple uses tho.
jimbires
Well-Known Member
I find it very useful . after using it I wouldn't want to be without it . it's kind of like a reloading manual that you fine tune to your gun . you set case water capacity , COAL , your exact bullet , rifle BBL length , outside temperature . after you've fired a few rounds you can use this data collected to adjust the burn speed of that lot of powder . you can see the recoil this load generates with a rifle weight you choose . you can see how bbl length changes affect velocity . you can punch in your desired max percent of powder case fill , and your desired max pressure ,it will spit out a list of powders from highest velocity , to lowest velocity meeting your specs . if you believe in the Chris Long "OBT " barrel time method , it gives the BBL time for that exact load your looking at . it's great for answering your " what if " questions .
john mcraney
New Member
- Joined
- Jan 10, 2018
- Messages
- 4
Would you mind running some info on VV N-570 in a 300 win mag with hornady brass , federal match 215 primers , hornady 225 eld-m Bullets seated to about 3.550 from a 30 inch barrel with a 1-9 twist . Charge weight starting at about 77 grains. I can't find data for that combo anywhere. Thanks for your help
Code:
Cartridge : .300 Win Mag
Bullet : .308, 225, Hornady ELD-M 30904
Useable Case Capaci: 80.084 grain H2O = 5.200 cm³
Cartridge O.A.L. L6: 3.550 inch = 90.17 mm
Barrel Length : 30.0 inch = 762.0 mm
Powder : Viht n570 ?, Temperature: 50 °F
Predicted data by increasing and decreasing the given charge,
incremented in steps of 1.0% of nominal charge.
CAUTION: Figures exceed maximum and minimum recommended loads !
Step Fill. Charge Vel. Energy Pmax Pmuz Prop.Burnt B_Time
% % Grains fps ft.lbs psi psi % ms
-10.0 89 69.30 2637 3475 43727 10068 93.9 1.580
-09.0 90 70.07 2666 3550 44897 10193 94.4 1.563
-08.0 91 70.84 2694 3627 46106 10314 94.8 1.547
-07.0 92 71.61 2723 3705 47360 10434 95.2 1.531
-06.0 93 72.38 2752 3783 48656 10550 95.6 1.515
-05.0 94 73.15 2781 3863 49996 10664 96.0 1.499
-04.0 95 73.92 2810 3944 51389 10775 96.4 1.483
-03.0 96 74.69 2839 4026 52833 10882 96.7 1.467 ! Near Maximum !
-02.0 97 75.46 2868 4109 54329 10987 97.1 1.486 ! Near Maximum !
-01.0 98 76.23 2897 4193 55879 11088 97.4 1.469 ! Near Maximum !
+00.0 99 77.00 2926 4277 57487 11185 97.7 1.451 ! Near Maximum !
+01.0 100 77.77 2955 4363 59156 11279 98.0 1.434 ! Near Maximum !
+02.0 101 78.54 2985 4450 60887 11368 98.3 1.417 ! Near Maximum !
+03.0 102 79.31 3014 4538 62686 11454 98.5 1.400 !DANGEROUS LOAD-DO NOT USE!jimbires
Well-Known Member
you get quickload here .
www.neconos.com
I've read guys talk about " Gordons reloading " doing about the same thing as quickload . I've never looked at it though .
Neconos.com
www.neconos.com
I've read guys talk about " Gordons reloading " doing about the same thing as quickload . I've never looked at it though .
