Problems with IOR 2.5-10 X 56.

Wiktor

Member
Joined
Jul 7, 2003
Messages
5
Hi!!

I bought a IOR scope 1.5-10X56 and set it up to my SAKO TRG with Sako optilock rings.

I cant screw the rear ringts tight because If I do that I can´t change power (2.5-10).

Does anyone have the same(similar) problems??
Is the problem because me???????????

Best regard.
wiktor
 

700

Well-Known Member
Joined
Jun 30, 2002
Messages
138
Location
Ireland
Wiktor

Measure the diameter of the tube. It might be oversized and not true 30mm.

Rgds

700
 

Jim Maloney

Well-Known Member
Joined
Oct 16, 2003
Messages
62
Location
Princeton, Ks.
wiktor,

Your getting the cap screws to tight on the rear. Loosen them up a bit and you'll be good to go.

The tolerences in the rear of the scope are very close. It's pretty easy to bind up the power adjustments.

Let me know if you need anything.

Jim
 

MachV

Well-Known Member
Joined
May 31, 2001
Messages
1,625
Location
Casper Wy
Had sorta the same problem when I used Warn rings on a 16x.If I tightened them at all the focus ring would not adjust.Used a different set of rings and problem didnt happen.
Some rings are not designed to be tightened against each other rather they are torqued...Badgers and NF come to mind.
 

Primary

LRH Assistant
Here are some related products that LRH members are talking about. Clicking on a product will take you to LRH’s partner, Primary, where you can find links to LRH discussions about these products.

 
 

Recent Posts

Top