I have a brand new x-bolt and finally got to cleaning the packing grease out. I have been at it for almost an hour now. I used methhydrate brush and pack. Then switch to solvent with same brush and patch. Even let the solvent sit for 20 mind and hit it with the brush. The barrel is still dirty patches are coming out black brownish. Any thoughts?
-
If you are being asked to change your password, and unsure how to do it, follow these instructions. Click here
Packing grease
- Thread starter plumeja
- Start date
Help Support Long Range Hunting Forum
gohring3006
Well-Known Member
Brake cleaner or Carb cleaner...
FearNoWind
Well-Known Member
"Goof Off" at your local home improvement center will also do the trick.
gohring3006
Well-Known Member
I think with both of our techniques mentioned. It seems to be important to cover the gas escape holes on the action so it wont get on the stock...
gohring3006
Well-Known Member
yes..
MudRunner2005
Well-Known Member
Cosmoline is some nasty stuff... First thing I do with every new rifle is take it home and clean it, and scrub the bore. Good luck.
Plum, perhaps you could remove the stock prior to starting the cleaning if you haven't already. The mentioned cleaners will work, but some cleaners leave a hazy residue. A light wipe with some quality oil will help. Good luck
