NF steel Ring heights

243redmist

Member
Joined
Feb 25, 2008
Messages
11
Location
Australia
G'day fella's

Just a quick and easy one for those who have been down the road iam travelling now.Iam about to mount a 5.5 x 22 x 50 NXS in a Rem 700 SA.

I will be fitting a 20 MOA Rail, and just wanted to know what height rings should i be using to obtain the lowest mount possible.


NF steel ring heights.

.885
1.00
1.125
1.265
1.375


Thank you in advance.
 
I would also reccomend the .885 height. With a Sendaro contour barrell, you can even fit a 56mm with our one-piece base.

Hope this helps,
Ken
 
I also recommend the 0885" rings. You will have a lot of room. I do recommend the Aluminum / titanium rings they are the way to go. The scope tube is aluminum so the materials will grow and constrict at the same rate. Also they weight is ½. I myself mainly use aluminum.

Also we have steel in aluminum in stock.

Mike @ CSGW

www.csgunworks.com
[email protected]

Here's some testimonials about CS GunWorks
FEEDBACK about CSGUNWORKS on AR15.com
FEEDBACK about CSGUNWORKS on Snipersparadise
FEEDBACK about CSGUNWORKS on the HIDE
 
Warning! This thread is more than 16 years ago old.
It's likely that no further discussion is required, in which case we recommend starting a new thread. If however you feel your response is required you can still do so.
Top