Need load info using rl-25 and 180 accubonds in 300rum

jpabisz

New Member
Joined
Feb 15, 2007
Messages
2
If anyone is willing to share I could sure use some load data for 180 accubonds in my 300ultra with rl-25.
 
i load my ultra mag with rl-25 and accubonds i use 96gr. of rl-25 with federal primers and remington brass to an over all lenght of 3.680" and i am getting 3500 f.p.s out of a 28 inch schnieder barrel hope this helps
 
Any info will help. I am shooting a stock 26" rem 700 that has been magna ported. Is the 96gr your max load??
 
Horse, I have a bone stock BDL-SS that I shoot the 180gr Gameking out of and 94.5gr of RL-25. I usually hold about 3/4 MOA with this load. If I recall, I started seeing pressure in my rifle around 95.0 or 95.5 gr.
 
i would not reccomend starting with 96gr. it is very hot!!! i would start around 90 and work up. no two guns shoot the same one of my friends guns shoots 92gr. and 180gr. triple shoks and shoot 3/4 inch groops out of a stock remington 700.
 
Warning! This thread is more than 18 years ago old.
It's likely that no further discussion is required, in which case we recommend starting a new thread. If however you feel your response is required you can still do so.

Recent Posts

Top