RL-26 / 300WM , 208amax, 200 grain accubond load info pls

[supermoto917]

Howdy folks, finally got my Savage FCP-HS project done. Picked up some RL26 and will be starting load development with the weather starting to become nice and all. But reaching out to folks who have used this powder and projectile combo . Can you please share where your starting point charge to max when you were developing your loads.

Thanks,
Paul

 

[Dgd6mm]

I have that same rifle and a couple hundred 208 Amax to try, but no RL 26. I wonder if quick load has it listed in their powders.

 

[kcebcj]

If you go to the Alliant website link below they have a table showing what looks like a max load for the 300. Drop back a few grains and go for it.

I have QuickLoad Ver 3.8 and RL 26 is not there but there is a update available that covers everything up to Sept 2015

Alliant Powder - Reloader's Guide

 

[supermoto917]

Hey thanks Jim, I browsed the Alliant site and the avg max load for a 200 grain projectile is 74 . So I loaded 5 rounds each from 72 - 74.5 in .5 grain increments for the 208 amax, hopefully I get a good node.