Separate names with a comma.
Discussion in 'Gunsmithing' started by shooter65, Jan 19, 2013.
Trim it past the chip and reshape...
Do you have the chip,if so wood glue or epoxy back,temp hold with tape until glue dries. If not need same kind of wood,match grain,take broken area and cut with fine backsaw,jewlers saw or file the damaged area flat to accept a slight large repair peice,glue that as mentioned above.Let dry , then sand to shape and refinish
Decided to go with the angle cut. Now need I need to do the finish work. Thanks for all your input!
Ilike it better now