A couple months ago I bought one of the new savage/stevens 200's just as an experiment to see what my handloading and a inexpensive gun could do (300 win mag...$279).
I'm an avid handloader.... but am no gunsmith...and have just enough reloading tools to know this gun didn't come from the factory perfect. First my stoney point headspace kit is telling me the shoulders are blowing forward .030" on virgin brass. It doesn't seem to be a problem...I set my resize dies for .003" headspace or use collet dies for reloading and see no problems after 3-4 reloads with cracks above the belt. 2nd my sinclair insert kit is telling me that my actual trim length for this gun is about .050"
longer than book dimensions. (I guess it makes some sense if the barrel is hanging out about .030" away from the action.).
I know it would be easy to have a gunsmith crank the barrel down tighter but I kind of wanted to leave the gun in total stock condition and it seems to be a shooter the way it is. I have already got quite a few loads that shoot 2" and under at 200 yds.
I've read articles where people say you get better accuracy by having your cases near the trim length for your gun and it kind of makes sense that is possible. Can any of you guys tell me if there is any detriment to leaving the barrel where it sits? I guess one advantage is I probably never have to trim a case for the life of the case but if you think it might help accuracy I would have it cranked down closer.
Give this ROOKIE your opinions please...BTW--the barrel on that gun is amazingly easy to clean and shoots many rounds with no signs of accuracy loss to fouling...been a fun experiement for me.
I'm an avid handloader.... but am no gunsmith...and have just enough reloading tools to know this gun didn't come from the factory perfect. First my stoney point headspace kit is telling me the shoulders are blowing forward .030" on virgin brass. It doesn't seem to be a problem...I set my resize dies for .003" headspace or use collet dies for reloading and see no problems after 3-4 reloads with cracks above the belt. 2nd my sinclair insert kit is telling me that my actual trim length for this gun is about .050"
longer than book dimensions. (I guess it makes some sense if the barrel is hanging out about .030" away from the action.).
I know it would be easy to have a gunsmith crank the barrel down tighter but I kind of wanted to leave the gun in total stock condition and it seems to be a shooter the way it is. I have already got quite a few loads that shoot 2" and under at 200 yds.
I've read articles where people say you get better accuracy by having your cases near the trim length for your gun and it kind of makes sense that is possible. Can any of you guys tell me if there is any detriment to leaving the barrel where it sits? I guess one advantage is I probably never have to trim a case for the life of the case but if you think it might help accuracy I would have it cranked down closer.
Give this ROOKIE your opinions please...BTW--the barrel on that gun is amazingly easy to clean and shoots many rounds with no signs of accuracy loss to fouling...been a fun experiement for me.