Die cleaning and maintenance

2xcluck

New Member
Joined
Nov 30, 2012
Messages
3
Using dies from RCBS, Hornady, Redding. What are you guys doing or not doing to clean and or maintain your dies?
 
I use Brake kleen for cleaning my dies. Flash dries rather quick.
robster
P.S It`s better to do it away from the wife she doesn`t like the smell!!!
 
New dies - disassemble and clean with carb cleaner. There is some anti rust product sprayed on new dies. Make sure you dry them out with a lint free paper towel. After they are dry, I spray the sizing, or body, or neck die with Hornady One Shot, shake out the extra, and let dry. Of note, this is the ONLY thing I use One Shot for - I do not have good luck using this product as a lubricant for sizing brass.

Used dies - same as above. But, if there are any scratches in the sizing die, I polish the inside of the sizing die with Flitz and a shotgun bore mop. You will NOT remove material, just need to have an excellent surface finish - no scratches!!
 
Warning! This thread is more than 12 years ago old.
It's likely that no further discussion is required, in which case we recommend starting a new thread. If however you feel your response is required you can still do so.

Recent Posts

Top