Custom Unlimited-Range Rifle w/ Spares, Dies, Reamers, Bullets +++ for Sale

Discussion in 'Guns For Sale' started by ELR Researcher, Jun 17, 2017.

  1. ELR Researcher

    ELR Researcher Well-Known Member

    Messages:
    1,237
    Joined:
    Aug 11, 2009
    Part-Out or Custom Unlimited-Range Rifle w/ Spares, Dies, Reamers, Bullets +++

    Action
    – Rangemaster Precision Arms/RPA “GBMF” (.50 BMG bolt face, single shot), S/N 50024; RPA trigger; custom bore guides (2 – one for each cartridge) and action wrench by Mark King Rifles; Murphy full length, 0 MOA, steel rail. This action is in perfect functional condition with one cosmetic mar (pic available). Detail photos at the Accurate-Mag item done at the SHOT Show 2013 (16 Jan 2013) - http://www.elr-resources.com/page16.html - $2695 as part-out, shipping and purchase-price insurance included

    Barrels (total of 7):

    Krieger - 416R, .390 bore/.400 groove, 1:10 twist, 36” finished

    (1) chambered in .400/.416 Barrett Improved; 1.930” for 12", taper to 1.450” over 6", then to muzzle at 1.450”; nitrided flat black, w/ Delrin thread protectors and PVC transit tube; never shot - $895 as part-out, shipping and purchase-price insurance included

    (1) chambered in .400/.416 Barrett Improved, contour as above – for fire forming (CoW only); nitrided flat black, w/ Delrin thread protectors and PVC transit tube; never shot - $895 as part-out, shipping and purchase-price insurance included

    (1) chambered in .400/.50 BMG Improved, contour as above – for fire forming (CoW only); nitrided flat black, w/ Delrin thread protectors and PVC transit tube; fire formed less than 100 cases - $795 as part-out, shipping and purchase-price insurance included

    (2) un-chambered blanks:

    a. (1) at 37”, 1.930” for 12", taper to 1.450” over 6", then 1.450” to muzzle; w/ PVC transit tube - $525 as part-out, shipping and purchase-price insurance included

    b. (1) at 37 5/16”, 1.930” for 12", taper to 1.450” over 6", then 1.450” to muzzle; w/ PVC transit tube - $525 as part-out, shipping and purchase-price insurance included

    K&P - 416R, .390 bore/.400 groove, 1:10 twist, 45" fin; 1.930” for 15", step down to 1.750” for 3", taper to 1.450” over next 12", to muzzle at 1.450”; nitrided flat black, w/ Delrin thread protectors and PVC transit tube

    (1) chambered in .400/.416 Barrett Improved – never shot - $1095 as part-out, shipping and purchase-price insurance included

    (1) chambered in .400/.50 BMG Improved – on rifle (well under 100 rounds) - $895 as part-out, shipping and purchase-price insurance included

    Gunsmithing by Mark King Rifles (PA)

    Pic of cartridges - .400/.50 BMG Improved (left), .50 BMG (for comparison), 420 gr CEB, .400/.416 Barrett Improved (right)

    Muzzle brake – Armalite AR-50 with custom timing ring and pin tool (by Mark King Rifles); perfect - $125 as part-out, shipping and purchase-price insurance included

    Chassis – XLR "Evolution BMG" model with 20" hand guard, "RPA Quad-lock BMG" inlet, flat black, with XLR folding buttstock adapter (never installed), front rail, and front bench rest plate (included but not pictured) - https://xlrindustries.com/collectio...ts/bench-rest-guide-plate?variant=10262564293 ; Ergo palm shelf pistol grip - https://xlrindustries.com/collections/chassis/products/evolution-bmg-chassis Purchase includes (2) custom, 5” wide, bench rest bag riders and attach pieces (shown in rifle pic).

    NOTE re XLR chassis - because the XLR cheekpiece is a wrap over with vertical sections on both sides, it must be removed to extract the action bolt. It is included and can be re-installed if desired.

    $745 as part-out, shipping and purchase-price insurance included

    Reamers and gauges (including a non-exclusive right to the design):

    > .400/.416 Barrett Improved – rougher and finisher, removable pilot, carbide, ACT Quantum coated; Go and No-Go gauges (all by PTG) - $435 as part-out, shipping and purchase-price insurance included

    > .400/.50 BMG Improved – finisher, removable pilot, HSS; Go and No-Go gauges (all by PTG) - $235 as part-out, shipping and purchase-price insurance included

    >PTG removable pilots (.3898, .3896, .3890, and .3888 - .3900 is MIA) - $50 as part-out, shipping and purchase-price insurance included

    > PTG Uni-Throater (.4005, with handle, Quantum coated) – forgot to include in pic - $75 as part-out, shipping and purchase-price insurance included

    Custom Die sets (both cartridges cases are made from .50 BMG brass, thus the large numbers of bushings):

    > Neil Jones (.400/.416) - full length forming/sizing, arbor-press style micrometer seater, expander (same one for both cartridges), reqd bushings (16) - $745 as part-out, shipping and purchase-price insurance included

    > Neil Jones (.400/.50) - full length forming/sizing, arbor-press style micrometer seater, expander (same one for both cartridges), reqd bushings (15) - $745 as part-out, shipping and purchase-price insurance included

    > Neil Jones case neck (inside) reamer die and reamer - $135 as part-out, shipping and purchase-price insurance included NOTE: Reamer needs a regrind.

    > Custom brass cut-off fixture (reduces the time to produce .416 Barrett-sized cases) - $165 as part-out, shipping and purchase-price insurance included

    Bullets:

    > Cutting Edge/CEB - 420 gr custom solids (MTAC 400 420, prototype, G1 BC .96-.98) – 52 pcs - $235 as part-out, shipping and purchase-price insurance included

    > Cutting Edge/CEB - 480 gr custom solids (MTAC 400 480 MAX, G1 BC 1.0+) – 283 pcs (some meplat trimmed and tipped) - $525 as part-out, shipping and purchase-price insurance included

    > G S Custom/GSC – 477 gr custom solids (#400477SP285 - http://www.gscustomusa.com/400477SP285.html) – 299 pcs - $435 as part-out, shipping and purchase-price insurance included NOTE: The chambers are cut for the Cutting Edge bullets. You will need to lengthen the throat to accept the GSC bullets.

    > Dynamic Research/Predator – 395 gr, custom solids – 21 pcs – FREE with first bullets purchased as part-out

    Brass:

    > RWS .50 BMG, new, unprimed, formed, ready for loading, .400/.416– 17 pcs - $45 as part-out, shipping and purchase-price insurance included

    > RWS .50 BMG, once fired/fire formed, spent primers, .400/.50 – 48 pcs - $85 as part-out, shipping and purchase-price insurance included

    > RWS .50 BMG, once fired/fire formed, primed, .400/.50 – 46 pcs - $125 as part-out, shipping and purchase-price insurance included

    > RWS .50 BMG, unprimed, new – 50 pcs - $165 as part-out, shipping and purchase-price insurance included

    > MTM cartridge boxes and correct trays (6 sets) - $22 each as part-out, shipping and purchase-price insurance included

    NOTE: This rifle, including a full size scope, will store completely in a SKB 2R6416-8 rifle case (the buttstock and muzzle break need to be removed and positioned separately inside the case – take 5-7 minutes to reassemble). That case is NOT included, nor is a scope.

    Overall length, as shown – 75 ½”

    Weight, as shown – 56#

    No “performance data” are available on the .400/.416 Barrett Improved as all load development was done on the .400/.50 BMG. With the 45” barrel, and custom Cutting Edge/CEB, 480 gr. MTAC bullets, reached 3250 without issues; pressure problems going higher – can resolve with a small false shoulder to keep the case against the bolt face until the cases are fully formed. Issue did not appear during initial fire forming where I only used CoW and a small volume of Bullseye. Purchaser/reloader – as always, proceed with CAUTION!

    Why I’m selling – moving on.

    Price as a “set” - $6495 plus actual cost to ship (USPS ground, fully insured)- will need to be adjusted for any prior part out sale; check or MO only, I do not do PayPal or wire transfers. Before you gripe about the price, please take the time to price all this gear and top-drawer gunsmithing - and find out the associated lead times. My cost for the above was well north of $18,500.

    Transfer must be conducted through your FFL and the action shipped to the FFL – everything else will ship direct to the buyer. The FFL needs to e-mail me a copy of his license. After I confirm the FFL is current and that the FFL’s shipping address matches the ATFOnline database, and your check or MO clears my bank, I will promptly ship.

    Please address detail questions to [email protected]. Some sites have limited photo-posting. Serious buyers, please e-mail for more pics - please be specific as to what you are looking for. Thanks for considering purchase of this excellent gear.
     

    Attached Files:

    Last edited: Nov 2, 2018
  2. THEIS

    THEIS Well-Known Member

    Messages:
    573
    Joined:
    Dec 10, 2016
    Bump for the ELR community.
     
  3. THEIS

    THEIS Well-Known Member

    Messages:
    573
    Joined:
    Dec 10, 2016
    Hello Oscar,

    I understand you stated "package" only but it has been available for a while now and just wanted to ask if you would be willing to sell some of the 400/BMG Imp components?

    Thanks,
    THEIS
     
  4. ELR Researcher

    ELR Researcher Well-Known Member

    Messages:
    1,237
    Joined:
    Aug 11, 2009
    Part out prices reduced 11/02/2018
     
    Last edited: Nov 2, 2018
  5. ELR Researcher

    ELR Researcher Well-Known Member

    Messages:
    1,237
    Joined:
    Aug 11, 2009
    BTT