Custom 30-338 Win, Proof, Thompson Precision, Mcmillan


Well-Known Member
Feb 3, 2017
I purchased this new-build rifle a few years ago from a fellow member on here. Been sitting in my safe ever since as I have been primarily bow hunting. The rifle package and build sheet is as follows:

This rifle is built on a Thompson Precision Action. It was a newer company out of Montana, they make a very high quality Remington 700 clone receiver. Primary extraction is excellent. Feeding, extraction and ejection are all great.

The rifle is chambered in 30-338 Win Mag. It will push the Berger 180 Elite Hunters up to 3100 fps with no pressure signs using 4831SC, the rifle is not handicapped by the shorter barrel length.

  • Double pinned Thick recoil lug
  • 8-40 scope bases
  • Deep helical fluting on the bolt
  • M16 extractor
  • Small diameter firing pin
  • Timney wide-shoe trigger
  • Proof Research Sendero Contour in 10-twist and 22" finish. Muzzle threads are 5/8-24 with a knurled thread protector.
  • 4-Port muzzle break
  • Stock is a McMillan Hunter in OD Green Painted Finish, flush cups on the left and a stud in the front, standard LOP
  • Remington magazine box, follower and spring
  • full pillar bedding with Marine-Tex
  • Cerakoted in Tungsten/Black mix
  • All work was done by Young's Gunsmithing in Sand Coulee, MT
  • Rifle alone weighs 7.2 lbs
  • It currently has two #35 bases since it is a double round bridge action. They will come with rifle
  • Included are 100 pieces of 1x fired 338 Win Mag Winchester brand brass, a set of Redding 30-338 dies, 50 pieces of unfired 338 Win Mag Hornady Brand brass.
Asking $2950 for Package Shipped to your FFL. Also have a NF 5.5-22 I could add to the Rifle for someone that interested in a complete package.


  • IMG_1312_zpsm2td6zci.jpg
    67.4 KB · Views: 806
  • IMG_1313_zpsak22ytah.jpg
    91.9 KB · Views: 732
  • IMG_1315_zpsrj8xahag.jpg
    78.2 KB · Views: 645
  • IMG_1316_zpssekmr6lb.jpg
    99.1 KB · Views: 590
  • IMG_1410_zpste0xghpw.jpg
    24.5 KB · Views: 557
  • IMG_1326_zps0ncp7vzj.jpg
    79.5 KB · Views: 800


Well-Known Member
LRH Team Member
Dec 20, 2008
Great Falls, MT
@mossyoak79, very nice rig. I believe I know the previous owner. Dave Young is my go-to gunsmith since 2003, and he knows how to build them.

Good luck with your sale.



LRH Assistant
Here are some related products that LRH members are talking about. Clicking on a product will take you to LRH’s partner, Primary, where you can find links to LRH discussions about these products.


Recent Posts