mossyoak79
Well-Known Member
- Joined
- Feb 3, 2017
- Messages
- 103
I purchased this new-build rifle a few years ago from a fellow member on here. Been sitting in my safe ever since as I have been primarily bow hunting. The rifle package and build sheet is as follows:
This rifle is built on a Thompson Precision Action. It was a newer company out of Montana, they make a very high quality Remington 700 clone receiver. Primary extraction is excellent. Feeding, extraction and ejection are all great.
The rifle is chambered in 30-338 Win Mag. It will push the Berger 180 Elite Hunters up to 3100 fps with no pressure signs using 4831SC, the rifle is not handicapped by the shorter barrel length.
This rifle is built on a Thompson Precision Action. It was a newer company out of Montana, they make a very high quality Remington 700 clone receiver. Primary extraction is excellent. Feeding, extraction and ejection are all great.
The rifle is chambered in 30-338 Win Mag. It will push the Berger 180 Elite Hunters up to 3100 fps with no pressure signs using 4831SC, the rifle is not handicapped by the shorter barrel length.
- Double pinned Thick recoil lug
- 8-40 scope bases
- Deep helical fluting on the bolt
- M16 extractor
- Small diameter firing pin
- Timney wide-shoe trigger
- Proof Research Sendero Contour in 10-twist and 22" finish. Muzzle threads are 5/8-24 with a knurled thread protector.
- 4-Port muzzle break
- Stock is a McMillan Hunter in OD Green Painted Finish, flush cups on the left and a stud in the front, standard LOP
- Remington magazine box, follower and spring
- full pillar bedding with Marine-Tex
- Cerakoted in Tungsten/Black mix
- All work was done by Young's Gunsmithing in Sand Coulee, MT
- Rifle alone weighs 7.2 lbs
- It currently has two #35 bases since it is a double round bridge action. They will come with rifle
- Included are 100 pieces of 1x fired 338 Win Mag Winchester brand brass, a set of Redding 30-338 dies, 50 pieces of unfired 338 Win Mag Hornady Brand brass.
L!
