Shane Lindsey
Well-Known Member
- Joined
- Jul 13, 2010
- Messages
- 3,727
Have noticed clickers on my loads within load ranges from Berger, not high end either. ADG cases. Very faint ejector pin so thought it may be upper end of pressure.
Went to set up the sizing die on 2x fired cases.
Removed firing pin and ejector. After working with the fired cases, all with clickers. Placed ejector pin back in to the bolt.
I wanted to see what virgin cases would feel like as I also get ejector swipe with virgin cases. I have polished the ejector pin and still get them, also get slight ejector print on start loads.
As I lifted the bolt on the virgin cases, I noticed the clicker at the top of the bolt lift. Is this a timing issue? Bolt closure is not as smooth as on some of my other rifles.
Action is a Rem 700 300 Ultra (Christensen before they made their own actions).
Anyone ever see this before? Looking for insight...is it fixable, worth fixing?
Thanks
Went to set up the sizing die on 2x fired cases.
Removed firing pin and ejector. After working with the fired cases, all with clickers. Placed ejector pin back in to the bolt.
I wanted to see what virgin cases would feel like as I also get ejector swipe with virgin cases. I have polished the ejector pin and still get them, also get slight ejector print on start loads.
As I lifted the bolt on the virgin cases, I noticed the clicker at the top of the bolt lift. Is this a timing issue? Bolt closure is not as smooth as on some of my other rifles.
Action is a Rem 700 300 Ultra (Christensen before they made their own actions).
Anyone ever see this before? Looking for insight...is it fixable, worth fixing?
Thanks