Area 419

Discussion in 'Reloading' started by Butte Sink, Sep 15, 2019.


Help Support Long Range Hunting by donating:


  1. Butte Sink

    Butte Sink Member

    Messages:
    14
    Joined:
    Sep 1, 2019
    Hello All,

    I wanted to see if anyone out there is using the 419 Auto trickler self center pan for there A&D?
    I love the idea but using mine I have to constantly zero my scale and it will fluctuate from .04 -.08
    I gave up and just use the stock A&D pans and the scale is flawless.
    Not to concerned, it came with the V3 kit but it would be great if it would zero like stock pans.
    Just wanted to see if someone else noticed this and may have a trick to adjust.
    Thanks
     
  2. m3mike

    m3mike Member LRH Team Member

    Messages:
    14
    Joined:
    Dec 4, 2014
    I have found that I need to wait a couple seconds and then it zeros out. Not sure why this is the case.
     
  3. Butte Sink

    Butte Sink Member

    Messages:
    14
    Joined:
    Sep 1, 2019
    Great Thanks

    I actually called 419 to see if they have had this issue prior
    They said no but did offer to send out a new one and see if it continues
    We”ll see if it maybe something in the mold
     
  4. Smokenaces

    Smokenaces Active Member

    Messages:
    38
    Joined:
    Nov 25, 2018
    Did the replacement pan fix the issue? I have the same issue but also could throw a charge, remove the cup and place back on the scale with a different reading. Thought at first it was something I was doing, moved the scale to a different room, same issue. Tried on different surfaces, wood/granite/glass, same outcome. No electronics or ceiling fan in the area. Have shut the HVAC vent. Have tried with the enclosure sheets and open. Finally gave up and went to the stock pan and no problems since.