If you have the Aztec upgrade, just sacrifice a case. If not, you can send some brass to Alex for testing.
One other option would be to send the brass and correct pilot to an Aztec user for finding the correct code. I'm not sure if your Amp unit would recognize a Aztec code. Just call Alex for his opinion. Great CS.
I don’t have the Aztec upgrade so I had full intentions of sending them 1 or 2 pieces of brass to test. Their test form says they require 6 pieces of brass, and I’m having a hard time letting that many go honestly.
I hope ADG doesn't get mad at me for posting this...I have a new AMP Mark II as well and I couldn't find a setting. Before sacrificing a piece of my .300wm and .308win brass, I emailed ADG to see if they had done any testing with the AMP/Aztec.
They hadn't and didn't have the settings, but they sent me some brass they had in the shop, complete with lot # information, for both cartridges! Only stipulation was that I relay the Aztec code back to them. They are different lots than the brass I had, but it was such a nice gesture on their part that I am going to sacrifice a piece from my own lots as well and relay all the info back. ADG is a great group of guys!
Now if I could just get some time to load some dummy rounds, fire form, and then run through the Aztec program...but hey, at least I'm spending time hunting!