7mm sherman max

I'm right behind you. I bedded the action last night and put100 rds together with 55 grains of H1000 and 180 ELDM's in new ADG brass for forming. I have to mount my scope and get a muzzle brake.

Rich, Any updates on availability of the dies?
they're here. I sent a bunch out last week. Do you have some ordered? Or maybe I shipped them but I dont remember a "yahoo" on any address🤔
 
My rifle is 26" barrel on a long action. I really hope it does over 3100 w/ 180 hybrids or I kinda feel like all exta cost and hassle of wildcat forming and spendy components was a bit of a waste.
 
My rifle is 26" barrel on a long action. I really hope it does over 3100 w/ 180 hybrids or I kinda feel like all exta cost and hassle of wildcat forming and spendy components was a bit of a waste.
It will if you put N570 in it. At least mine does with 180 Bergers.
RL26 should do it too
 
Just so I'm clear- The 7 MAX is designed for medium length actions. I have a 3.2" OAL magazine, this should work great for that?

I can take normal 7 saum brass, load, and shoot it in the MAX chamber and it's basically an Ackley Improved version of the saum? Same neck length and base to neck/shoulder junction? z

Thank you
 
Just so I'm clear- The 7 MAX is designed for medium length actions. I have a 3.2" OAL magazine, this should work great for that?

I can take normal 7 saum brass, load, and shoot it in the MAX chamber and it's basically an Ackley Improved version of the saum? Same neck length and base to neck/shoulder junction? z

Thank you
All correct. Less body taper than a saum but you have the idea
 
What primer are you using on your on your loads? Haven't been as happy with the Federal primers as I would like.
 
Top