7mm build input?

corey006

Well-Known Member
Joined
Nov 10, 2003
Messages
93
Location
Sask,Canada
Thinking of 7mm SAUM.

Will be for Deer out to 1000 yards.

Manners EH5
Defiance Deviant Ultralight
26 inch Proof Research Carbon barrel
Timney trigger

Any input or tips?
 
7mm SS or 7mm RemMag
Action of your choice, don't forget the Curtis actions (Chase Curtis is also a member here)
26" 1:8 twist Proof Sendero contour
Timney trigger
Stock of your choice
 
Was not familiar with 7 S.S....I skimmed the threads on it.

Interesting for sure...

I am in Canada so I think I would stick with a non-wildcat.
 
I would stay far far away from the 7LRM! You can also look at the 7 Blaser Magnum. 28 nosler looks to fit what you're looking to do.
 
I will never be without a 7 SAUM. I love this cartridge, especially, in a Remington Model Seven SS.
 
Whats wrong with 7 LRM....brass availability or poor quality.

I like the long neck on case....

Like what mudrunner said! Sent out some brass with very thick, out of speck necks and never informed any customers. Made for some very dangerous loads. It's hornady brass and had a very short life. This is why I am building a 7mm Blaser. Norma brass and better case design.
 
I have not heard that about LRM brass...too bad but good to know.


Blaser 7mm is interesting but not @ $98/25 pieces for brass!!!

28 Nosler is $90/25 pieces

300 saum is $68/25 pieces

Those are CAD $$$ ...in USA you might have better prices?

I am going to stick with something based off SAUM case.
 
I have not heard that about LRM brass...too bad but good to know.


Blaser 7mm is interesting but not @ $98/25 pieces for brass!!!

28 Nosler is $90/25 pieces

300 saum is $68/25 pieces

Those are CAD $$$ ...in USA you might have better prices?

I am going to stick with something based off SAUM case.

7mm blaser brass is no where close to $98 for 25. It's $59 US or $75 CAD at the current exchange rate.
https://www.midsouthshooterssupply..../7mm-blaser-mag-unprimed-rifle-brass-25-count
 
Warning! This thread is more than 7 years ago old.
It's likely that no further discussion is required, in which case we recommend starting a new thread. If however you feel your response is required you can still do so.

Recent Posts

Top