6.8 SPC to 270 WSM?

sambo3006

Well-Known Member
Joined
Jul 30, 2004
Messages
1,395
Location
SW MO
I have a T/C Encore and I would like to have a 270 WSM barrel. Is it feasible to get a T/C 6.8 SPC heavy barrel and have it rechambered and extractor modified? Have any of you guys done it? Thanks----Sam
 
Sambo,
Although it can be done (has been done) I would not advise it. The diameter of the head of the WSM case combined with the pressure which you would normally run a WSM in a bolt action is to much for the Encore (flexing, which leads to case head seperation). You can use a WSM safely in a Encore, but you would need to load it down some. To me that defeats the purpose of the WSM to begin with. A 270 Win AI would likely give the same performance safely than you could get with the WSM.
 
Warning! This thread is more than 19 years ago old.
It's likely that no further discussion is required, in which case we recommend starting a new thread. If however you feel your response is required you can still do so.
Top