6.5 PRC RCBS shell holder size?

[wyosteve]

Either I'm blind or ignorant, but for the life of me, I can't find the shell holder size on the RCBS chart for the 6.5 PRC. An 'image' search shows a number 09 however. Can someone enlighten me? Thanks much.

 

[Dmagna]

Same one as 300 win I think it's #4 or #5

 

[wyosteve]

Great. I appreciate it!

 

[Dmagna]

Correction rcbs says it's #38

 

[CaptDru]

I use a #4. What would be the difference between the #4 and #38?

 

[MagnumManiac]

About .002"

 

[Axl]

Go to WWW.google.com
6.5 prc rcbs shellholder = #38

Shop Rifle & Shotgun Reloading Supplies | Dies | Bullets | Hulls | Wads | Powder - Precision Reloading

Shop online for shotshell and metallic reloading supplies, shooting supplies, metallic presses, rifle reloading components, shotshell reloading components, shooting accessories, rifle reloading brass and Bullets.

www.precisionreloading.com

 

[wyosteve]

Thanks for all the guidance. Now to find one! I got lucky last week and found ammo, brass and powder!

 

[lylerl]

Correction rcbs says it's #38

Shell Holder # 4 | RCBS

Buy Shell Holder # 4 at RCBS, the leading producer of high-quality reloading equipment supplies for over 60 years.

www.rcbs.com

 

[can1010]

the #4 is fine for the PRC if you already have one. the #38 is better for the rebated rims of the WSM, RUM, SAUM cases but does work with the PRC case

 

[L.Sherm]

The WSM actually takes a #43

 

[can1010]

#38 works just fine for WSM. the #4 and #38 are all I use for the belted mag through WSM

 

[FEENIX]

Below is a shell holder cross reference chart.

https://www.grafs.com/uploads/technical-resource-pdf-file/15.pdf

Based on .300 WM, you can use ...

RCBS - #4 or ...
Hornady - #5
Lee - #5
Redding - #6

 

[L.Sherm]

#38 works just fine for WSM. the #4 and #38 are all I use for the belted mag through WSM

I've had some that would and some wouldnt. I have used #43 with a 28 and 30 nosler case but if they were really tight not sure if it would strip the rim off.