6.5-284 with Hybrid 100V

Try sending a PM to my buddy "learning". He uses it with the 140 grn. Bergers. Great accuracy, but I'm not sure of his exact load.
 
Max load is 51.5 in both my rifles with 3.220 OAL. One loves it the other hates it. Velocity is a hair over 3000. My most accurate load in the one that likes it is 49.5 grains, Fed 210M primer, Lapua brass. From that rifle with only a 23 inch barrel velocity with this load runs about 2870.
 
Sweet, thanks. I appreciate the input guys.


My Lapua brass and 139 grain Scenars should be in by Wednesday or so. I have a couple hundred GM210M's left too.

The reason I want to use H100V is because it works great in my 6mm284 and 338 WM. I think it will work okay in the old lady's 7mm RM too. How nice would it be to have one powder for four cartridges.....

Plus I have over seven pounds of it.
 
Warning! This thread is more than 14 years ago old.
It's likely that no further discussion is required, in which case we recommend starting a new thread. If however you feel your response is required you can still do so.

Recent Posts

Top