• If you are being asked to change your password, and unsure how to do it, follow these instructions. Click here

.375 Whelen IMP. Loads

waltercrouse

Well-Known Member
Joined
Jun 18, 2013
Messages
225
Location
SAN DIEGO,Ca.
I have a new project ,I am trying build a .375 Whelen IMP. I have barrel coming and ordered the reamer with head space gauge. The reloading data ,I do not have. Does anyone have the reloading data or where I can find the data? Ackely had the data in his book. But I need the reloading data with latest new powders loads. Speer had 235 grain bullet, at one time. I do not know if they still have it being made.gun)
 
I can't be of any help on this load as I don't have one of these. However just to let you know Speer is still producing the 375 cal 235gr bullets. Powder Valley has them in stock. I use these in 375 Winchester and killed a bear in Maine this fall with one of them.
Good luck!
Jay
 
This really isn't much different than using 270 data as a start for 280 loads or the like. Start a bit lower than usual and stay safe in your run-up.
You should be able to pick up a load from a standard 35 whelen with a similar bullet weight, drop back a bit for safety, and work up into a max charge for your 375 whelen ai. Remember the powders these cartridges are capable of using can be dropped back a bit and still be safe; it's not like we can can toss 50bmg type powders in our whelens.
Personally, I'd start with the 235 speer and a win primer with necked up '06 brass... then with rl15 go from low 50's to the high 50's/ low 60's. I'm using 60 rl15 with the 220 speer fp in my 35 whelen (standard).

In any case, the 375 whelen ai should be a fun round to shoot with plenty of knockdown power. I do have a 280 grain 375 cal gs/ fn mould that may do very well too. I shoot the pill with a dose of rl7 under it in my 375h@h for fun once in a while.
 
I have a new project ,I am trying build a .375 Whelen IMP. I have barrel coming and ordered the reamer with head space gauge. The reloading data ,I do not have. Does anyone have the reloading data or where I can find the data? Ackely had the data in his book. But I need the reloading data with latest new powders loads. Speer had 235 grain bullet, at one time. I do not know if they still have it being made.gun)


There some in Wildcat Cartridge Vol II test done by Mike Thomas for 375 Whelen Improved. Powders he use IMR-4064,IMR-4895,IMR-4320 bullets from 235gr to 300gr. I've got Ackley book and Vol I he has loads for 375 Whelen and only couple for the Improved.

I shoot 35 WhelenAI with Kreiger barrel.

You could start with Ackley data for the 375 Whelen.

375_12_235

I think you could do search on 375 Whelen.
 
There some in Wildcat Cartridge Vol II test done by Mike Thomas for 375 Whelen Improved. Powders he use IMR-4064,IMR-4895,IMR-4320 bullets from 235gr to 300gr. I've got Ackley book and Vol I he has loads for 375 Whelen and only couple for the Improved.

I shoot 35 WhelenAI with Kreiger barrel.

You could start with Ackley data for the 375 Whelen.

375_12_235

I think you could do search on 375 Whelen.
I found reloading data in the Barnes reloading data with 375 Scoville which is 375-06 based case. I also found some info on Kindle ,Hawk reloading manual. It is called 375 hawk/scovill and it is a 375-06 case round.
 
I found reloading data in the Barnes reloading data with 375 Scoville which is 375-06 based case. I also found some info on Kindle ,Hawk reloading manual. It is called 375 hawk/scovill and it is a 375-06 case round.


Z-Hats been chambering the Hawk line for some time plus that manual. I know they claim 375 H&H velocity for the 375 Hawk and they did that with 358 Hawk, claiming the 358 Hawk is what 35 Whelen should of been.

I did look at that 358 Hawk but decided to go with the Ackley as I wanted 24" barrel vs 26" for the Hawk. Might want to look at what barrel they used for testing those loads.
 
The 57 grains of H4895 were absolute maximum on my rifle.


375 W AI​
M98​
235​
Speer​
61​
H335​
0.729​
iron sights​
54​
1.29"​
375 W AI​
M98​
235​
Speer​
61​
H335​
1.970​
M8-4x​
100​
1.88"​
375 W AI​
M98​
235​
Speer​
61​
H335​
1.720​
M8-4x​
100​
1.64"​
375 W AI​
M98​
170rn​
CAST​
?​
?​
0.820​
iron sights​
54​
0.78"​
375 W AI​
M98​
270​
Horn SP RN​
57​
H4895​
0.660​
M8-4x​
100​
0.63"​
375 W AI​
M98​
270​
Horn SP​
57​
H4895​
0.660​
M8-4x​
100​
0.63"​
 

Recent Posts

Top