338 edge +p load data

skinny pedal

Well-Known Member
Joined
Nov 12, 2012
Messages
245
Reaction score
142
City & State/Province
graham washington
got my 338 edge +p all done. Shawn Carlock chambered it and did a great job. trued action 30 inch benchmark 9.3 twist.
looking for what others are using for data in the plus p chambers.
so far 96 grains of h1000 gives good results at 2950 fps with berger 300 gr. otm
looking for Retumbo data since I have a bunch of it.
thanks. Casey....
 
Last edited:
you did not list bullet weight nor type (solid or jacket and lead core),
and oal
 
If you need some more OTM'S, get ahold of Alex Wheeler. He is selling 1K
 
Ok guys whats a good load for rl33 and retumbo with 285 eldm. I'm running Nosler brass at the moment
338 edge +p chamber 30" bench mark 9.3 twist. Blue printed Remington action
Thanks for any input
 
got my 338 edge +p all done. Shawn Carlock chambered it and did a great job. trued action 30 inch benchmark 9.3 twist.
looking for what others are using for data in the plus p chambers.
so far 96 grains of h1000 gives good results at 2950 fps with berger 300 gr. otm
looking for Retumbo data since I have a bunch of it.
thanks. Casey....
Skinny Pedal... h.ow much Retumbo did you end up using on that 300 grain Berger in you 338 Edge? Ive used RL33 and N568 & N570.
N568 Shot good and Reloder 33 shot great at 3050 yards with 1st & 5th round impact in a match.However I found some powder kernnels on the RL33 on shooting deck near muzzle so its not burning it all.It has a 31.5 inch barrel abd is running 2998 to 3,000 fps with 299 grain DTAC and 300gr Berger. With VihtaVuori N570 it runs 3015 fps with same bullet a little temperature sewnsitive.Just looking for another option.I also tried Winchester Staball HD and didnt get tghe velocity I needed.
 
Back
Top