300 Win Mag Load

scsims

Well-Known Member
Joined
Dec 10, 2007
Messages
336
Location
Central, KY
I plan on working up a load using 180gr Accubond bullets and I currently have H1000 powder. Is this powder a good chose for the 300 WM and 180 Accuonds?
 
i had better luck with h4831 in my 300wm 180 ab over 79gr 4831 fed 215 gm primer fed gm brass this was max load in my gun start lower and work up it gives me just over 3100 fps in a 26 inch hart barrel
 
I'm using 81.5g of H1000 with a 190g Berger VLD. I'm shooting 5 shot groups right at .5 MOA. I would say it is a great powder for the accubond.
 
Try IMR 4831,Win cases,Fed 210M primers,My best accuracy was at 72.5 -73.0 grains,But start low and work up! Good luck!
 
Warning! This thread is more than 17 years ago old.
It's likely that no further discussion is required, in which case we recommend starting a new thread. If however you feel your response is required you can still do so.

Recent Posts

Top