Asking $300.00
95 pieces of ADG brass for the 300 Sherman Short; never fired but have been expanded from 7mm to 30 cal, loaded and pulled
1 modified brass case for OAL gauge.
1 set of Hornady dies
3 bushings; 335, 334, 332
1 shell holder
If bought individually the brass and dies would run you over $400.
Rich Sherman is coming out with a new /B series reamer, he told me this seating die will work with the new reamer, and the current resizing would work to bump the shoulder however you will need a new Full Length die. He hopes to sell individual ones for around $80 within the next few months.
95 pieces of ADG brass for the 300 Sherman Short; never fired but have been expanded from 7mm to 30 cal, loaded and pulled
1 modified brass case for OAL gauge.
1 set of Hornady dies
3 bushings; 335, 334, 332
1 shell holder
If bought individually the brass and dies would run you over $400.
Rich Sherman is coming out with a new /B series reamer, he told me this seating die will work with the new reamer, and the current resizing would work to bump the shoulder however you will need a new Full Length die. He hopes to sell individual ones for around $80 within the next few months.
