300 PRC loads....looking for recommendations based on what I have

[TBuckus]

Regarding Hammer hunters, I was told to use similar weight bullet recipes. Absolutes are different. You need to use slightly lighter weight recipes.
I was able to use Nosler data for my 7mm and it worked great for load development.

 

[loghome]

If you go with the burgers start low lower than they tell you. Had 200 yd I can keep mine in a 1-in group. 79.5 grains h1000 powder with a muzzle velocity of 3029. I'm using 210 vld hunting bullet.

 

[loghome]

If you go with the burgers start low. Don't start where burger tell's ya. I'm loading 79.5 grn H1000 burger 210 VLD with a muzzle velocity of 3029. I can keep them inside 1" at 200 yds.

 

[Ua26fitter]

Run that 215 Berger with the N570 if you are looking for a long range load.
If looking to kill animals closer go with the hammer and the fastest out of those powders due to the long bullet is gonna take up a lot of case capacity.

Kris