longrangehunterII
Well-Known Member
I have (5) 100 ct. boxes of 3x Lapua Brass-$250.00 shipped for all 500 pieces of brass. That's $50.00/100. ALL THE BRASS IS SOLD.
Prior to FF-This brass was only ran over a carbide button to round out the necks prior to chamfering them on the inside before the first firing!
1x I then neck sized them through a .291 Ti bushing I have a tight chamber too so very little movement and I DID NOT USE A BUTTON.
2x I used a .008 Redding Comp Shell Holder and the F/L Bushing die to just push back the shoulder .002" for a light crush fit in the chamber of my GAP 260.
Redding Type S F/L Match Die Set ($140.00), and a Type S Neck Die only (SOLD) No Bushing included with either Die.
Prior to FF-This brass was only ran over a carbide button to round out the necks prior to chamfering them on the inside before the first firing!
1x I then neck sized them through a .291 Ti bushing I have a tight chamber too so very little movement and I DID NOT USE A BUTTON.
2x I used a .008 Redding Comp Shell Holder and the F/L Bushing die to just push back the shoulder .002" for a light crush fit in the chamber of my GAP 260.
Redding Type S F/L Match Die Set ($140.00), and a Type S Neck Die only (SOLD) No Bushing included with either Die.
Last edited: