146gr hammer hunters 7mm rem mag

[BOOMSMACK44]

Switching over from lead to copper for California. I have a weatherby accumark 7mm rem mag. 1-9.5 twist barrel. Trying to figure a good powder combination for load development. I have RL 19 and 22 and IMR 4350. Been practically impossible to find RL 23 which I've heard is the most temp stable powder. Has anyone used 19 or 22 for the 146gr hammer hunters?

 

[Brush buster]

Try H1000

 

[purpledragon]

Try H1000

The 1000 or anything close in burn rate will work with the HH bullets. A faster powder with the AH's though, those guys make an AWESOME BULLET....... Thanks, Hammer Bullets for great weight choices as well....

 

[GLTaylor]

Switching over from lead to copper for California. I have a weatherby accumark 7mm rem mag. 1-9.5 twist barrel. Trying to figure a good powder combination for load development. I have RL 19 and 22 and IMR 4350. Been practically impossible to find RL 23 which I've heard is the most temp stable powder. Has anyone used 19 or 22 for the 146gr hammer hunters?

Go to Hammer Hunter Load Data on this Forum. Lots of data there.

 

[SouthLoganCountyShooter]

131hh shot very good in my wife's wby 7rm with imr4451. Hers wanted them deep like a Barnes 75k off lands

 

[ButterBean]

Try H1000

H1000 will be way too slow

 

[ButterBean]

Switching over from lead to copper for California. I have a weatherby accumark 7mm rem mag. 1-9.5 twist barrel. Trying to figure a good powder combination for load development. I have RL 19 and 22 and IMR 4350. Been practically impossible to find RL 23 which I've heard is the most temp stable powder. Has anyone used 19 or 22 for the 146gr hammer hunters?

Start with the IMR 4350

 

[Jbumblebee]

I've been working with the 143gr Hammer Hunter and 160gr Hammer shocks I've posted a few of my experiments in the reloading section. I got a new chronograph and haven't had a chance to post my results here yet.

 

[Jbumblebee]

I haven't tried IMR 4350 yet. Magnum primers are running low for me

 

[ButterBean]

I haven't tried IMR 4350 yet. Magnum primers are running low for me

There's a ton of speed left on the table yet

 

[Jbumblebee]

There's a ton of speed left on the table yet

I know. I have my existing hunt load ( 20 rounds ) I would feel better playing with the 7mm if I had another thousand mag primers. Of course, I'm just like many others. I have plenty of Large Rifle ones.

 

[ButterBean]

What powders do you have on hand?

 

[ButterBean]

I know. I have my existing hunt load ( 20 rounds ) I would feel better playing with the 7mm if I had another thousand mag primers. Of course, I'm just like many others. I have plenty of Large Rifle ones.

I rarely use Mag primers in anything until I get into the Rums, I run CCI 200 in almost everything

 

[dogz]

Switching over from lead to copper for California. I have a weatherby accumark 7mm rem mag. 1-9.5 twist barrel. Trying to figure a good powder combination for load development. I have RL 19 and 22 and IMR 4350. Been practically impossible to find RL 23 which I've heard is the most temp stable powder. Has anyone used 19 or 22 for the 146gr hammer hunters?

R22 and a 120 of your choice, we've hammered quite a few critters from yotes to elk with 22 and the 120 TTSX