6.5 creed magnum

Prices won't be an issue if these hold.
 

Attachments

  • IMG_4927.png
    IMG_4927.png
    822.1 KB
  • IMG_4926.png
    IMG_4926.png
    929 KB
  • IMG_4923.png
    IMG_4923.png
    999.1 KB
  • IMG_4924.png
    IMG_4924.png
    897 KB
  • IMG_4925.png
    IMG_4925.png
    1.1 MB
Can't understand why not just step up if you need more. 6.5 rpm, 6:5/300 wby, 6.5 prc or the 264 win mag. I think it's the guys thinking they're getting free lunch, they can't lie to or overcome physics, it'll have more recoil reguardless of what they try to have you believe. I think the 556 is next followed by most likely the 308.
No belted mags or fat cases coming from what I know, bolt thrust becomes an issue. They want the most popular slender beltless cases of the last 15 years.
Why would I build another rifle or spend a grand on barrels and bolts when I could just use what I have? Plus I can shoot cheap Norma match all year unlike any of the magnums
 
Do you think any critters will know the difference?
Depends on distance. Out to 500-700, probably not. If you keep shots to 500-600, then 300fps won't matter.

But higher speeds = less wind drift. Wind is the greatest unknown downrange effect.
Higher speeds = higher impact velocity at distance. Meaning stretching distances for minimum impact velocity for proper bullet expansion. 250-300fps can add 200+ yards to that maximum effective range.

I couldn't care about less drop at distance. That is easy to overcome by a few more clicks on the turret.
 
My guess is that pressures will be close to 67K psi plus. Any info on primers? What will conventional primers look like at high pressures to get another 10 -11 % more velocity?

Same steel as used in nuke reactors ! - what's next - U235 or Plutonium fissioned ammo (better than R26) :rolleyes:.

Would not be surprised to see ammo recalls.
More likely 80k psi.

As for primers, I tested the .277Fury Hyb brass in my 20" .260AI vs Alpha SRP brass.

Alpha SRP w. H4350 = 2984fps w. 130 OTM max w. slight ejector marks and just a hint of bolt lift
Fury Hyb w. H4350 = 3186fps w. 130 OTM, no bolt lift, just a hint of cratering but still rounded primers.
20250526_123840.jpg

20250531_112633.jpg

20250531_112629.jpg

20250601_064217.jpg

20250531_114148.jpg
 
I'm sure it's been posted but what do you guys think, think it's safe in the average rifle, and a 308 on the way should make things interesting.

 
My guess is that pressures will be close to 67K psi plus. Any info on primers? What will conventional primers look like at high pressures to get another 10 -11 % more velocity?

Using the NAS3 cases with 308 at 80k psi.

3 firings

WLR primer.

Screen Shot 2026-06-05 at 9.19.35 PM.png



 
The 308 imo will be the ultimate game changer, a 20inch bbl with similar performance, then the fact of the ar10's, scars, and countless others, along with mass availability with performance to match a 300 win, that's next level stuff.
130-140 weight class at 3400+ fps.
 
Back
Top