338wm die and powder help

tlittle

Member
Joined
Mar 14, 2013
Messages
6
I am getting set up to load 338wm which is my first belted case. I was told not to use a FL die? Which dies are best? All I can find locally are RCBS FL.

Also I am gonna be loading some Hornady #3310 200gr sp-rp interlocks. What powder would uield the best results? I have loaded. 308 in the past but normally only load handgun and I am totally new to magnums.
 
I am getting set up to load 338wm which is my first belted case. I was told not to use a FL die? Which dies are best? All I can find locally are RCBS FL.

Also I am gonna be loading some Hornady #3310 200gr sp-rp interlocks. What powder would uield the best results? I have loaded. 308 in the past but normally only load handgun and I am totally new to magnums.
Use the rcbs dies; they'll be fine. They are good dies as long as you set them up so you only bump the shoulder a couple of thou. on a fired brass. I use the 225 hornady sp with 75 grains rl19 and have killed to 500+ yards with my #1 in 338 win. With the 200 you would probably do as well with 760 or 4350.
 
Warning! This thread is more than 12 years ago old.
It's likely that no further discussion is required, in which case we recommend starting a new thread. If however you feel your response is required you can still do so.

Recent Posts

Top