6.5-284 147 eldm r19 seating depth test 300

Mram10us

Well-Known Member
Joined
Oct 19, 2019
Messages
3,826
Location
Idaho
92984423-EEB8-43F3-A446-54A73EDA275E.jpeg
This bullet is showing some promise. Loaded up 4 of each of the coals with 50.4 r19 and wlr primers.

5nov19. Update with more refined seating depth test. Shot 3 each round at 200yds
36172AA8-137C-4050-9948-04D22FEB2942.jpeg
 
Last edited:
Just loaded up 6 of each at 3.030, 3.040 and 3.050 with same charge. After this I think I'll play with powder charge again +/- .2 either side.
 
Great day. Here is a seating depth test at 300. Very happy. First group was four shots. Second and third were only three because I could see it spreading out. I will load up some of the number one group and take them out to 1200 yards this weekend
6B629994-3FC4-405A-BBCD-7B158B05C057.jpeg
 
Great day. Here is a seating depth test at 300. Very happy. First group was four shots. Second and third were only three because I could see it spreading out. I will load up some of the number one group and take them out to 1200 yards this weekend
View attachment 156982
Looks like you are getting the hang of it. You are a busy guy. I think you will find RL19 to not be very temp stable. I like Retumbo or H1000 in the 6.5x284.
 
Warning! This thread is more than 5 years ago old.
It's likely that no further discussion is required, in which case we recommend starting a new thread. If however you feel your response is required you can still do so.
Top