- Joined
- Aug 28, 2017
- Messages
- 351
Different from most with recoil lug separate from action in stock. Who has done this and what method did you use? Pictures help, lol.
The benefit to bedding a laminate stock aside from any possible accuracy improvement is strength. I have seen many laminate stocks crack. I wouldn't shoot anything but a rimfire in a laminated stock without bedding it.Be aware that the more bedding material you put around the recoil lug the less recoil lug you have! Never saw any real improvement in accuracy as a result of bedding a Boyd's laminate stock and I have done a few over the years.
Agree here, especially the Boyd's savage stocks. There is very little material where the rear action screw is positioned between the trigger inletted area and magazine cutout. The two Boyd's I have both cracked there before pillars and bedding. After pillaring/bedding more torque can be applied to both action screws resulting most often in more accuracy.The benefit to bedding a laminate stock aside from any possible accuracy improvement is strength. I have seen many laminate stocks crack. I wouldn't shoot anything but a rimfire in a laminated stock without bedding it.
2 boyds, 3 rugers, and a remington stock. The first one happened when I was 17 while shooting at an elk with my ruger m77 30-06. I missed and shouldn't have, the shot felt good. I looked at my rifle and the tang was chipped out. The entire recoil lug cracked on both sides and allowed the action to force readward and crack out the tang.To each his own. Never ever had a Boyds stock crack.