Ingwe
Well-Known Member
- Joined
- Jul 3, 2011
- Messages
- 1,036
I am trying to fund an upcoming hunt so I need to sell this rifle:
Action:
Winchester M70 Left Hand in 7mm Remington Magnum. Action is blueprinted, lapped, bolt-handle replaced with med sized tactical knob, with Jewel Trigger....work done by Hill Country Rifles. Bolt is silky smooth when you work it and as a result some of the cerakote is rubbed away....it's perfect. It also has a Ken Farrel 20MOA Piccatinny Rail. I did remove 2 of the front-end rails to accommodate a 56mm Nightforce Scope so it looks a bit rough cosmetically but it is 100% functional. 8X40 receiver holes.
Barrel:
26" plus the Vias muzzle break, Benchmark stainless steel barrel #4 contour. Barrel and action are both cerakoted matt black. Barrel has exactly 143 rounds through it and I will send you the 1X fired cases as well. Re barrel by HCR as well.
Stock:
Manners TA 13.75" to Limbsaver Pad. Pillar Bedded. Stock was repainted matt black when I bought it 2nd hand. It isn't a perfect paint job but it didn't bother me so I left it that way. I also have the factory wood stock, which is also pillar bedded. Bird shot has been added to the for-end for extra weight and I glued a foam pad onto cheek piece for a bit of height. It is looking rough but it IS a pillar bedded stock to the action and barrel, should you want to switch stocks to use a sporter-sized barrel.
I also had a Custom Redding Sizing Die made for the 1X fired brass which I will include as well. I think that the die was $200 to have made. The neck has a bushing die not an expander ball. I will also send 162 1X fired brass from the factory barrel.
The rifle is overall in Good Condition. There are minor scratches, dings, etc but nothing crazy. Absolutely NO rust or anything like that. Mechanically it's PERFECT.
As you can see I have approx $3,000 into the gun so I think that a fair starting point is $1500.
Thanks!
Action:
Winchester M70 Left Hand in 7mm Remington Magnum. Action is blueprinted, lapped, bolt-handle replaced with med sized tactical knob, with Jewel Trigger....work done by Hill Country Rifles. Bolt is silky smooth when you work it and as a result some of the cerakote is rubbed away....it's perfect. It also has a Ken Farrel 20MOA Piccatinny Rail. I did remove 2 of the front-end rails to accommodate a 56mm Nightforce Scope so it looks a bit rough cosmetically but it is 100% functional. 8X40 receiver holes.
Barrel:
26" plus the Vias muzzle break, Benchmark stainless steel barrel #4 contour. Barrel and action are both cerakoted matt black. Barrel has exactly 143 rounds through it and I will send you the 1X fired cases as well. Re barrel by HCR as well.
Stock:
Manners TA 13.75" to Limbsaver Pad. Pillar Bedded. Stock was repainted matt black when I bought it 2nd hand. It isn't a perfect paint job but it didn't bother me so I left it that way. I also have the factory wood stock, which is also pillar bedded. Bird shot has been added to the for-end for extra weight and I glued a foam pad onto cheek piece for a bit of height. It is looking rough but it IS a pillar bedded stock to the action and barrel, should you want to switch stocks to use a sporter-sized barrel.
I also had a Custom Redding Sizing Die made for the 1X fired brass which I will include as well. I think that the die was $200 to have made. The neck has a bushing die not an expander ball. I will also send 162 1X fired brass from the factory barrel.
The rifle is overall in Good Condition. There are minor scratches, dings, etc but nothing crazy. Absolutely NO rust or anything like that. Mechanically it's PERFECT.
As you can see I have approx $3,000 into the gun so I think that a fair starting point is $1500.
Thanks!
Attachments
-
IMG_4683.jpg45.7 KB · Views: 80
-
IMG_4684.jpg307.6 KB · Views: 78
-
IMG_4685.jpg80.4 KB · Views: 71
-
IMG_4686.jpg159 KB · Views: 82
-
IMG_4687.jpg181.5 KB · Views: 71
-
IMG_4688.jpg270.9 KB · Views: 73
-
IMG_4690.jpg370.9 KB · Views: 76
-
IMG_4692.jpg115.1 KB · Views: 78
-
IMG_4695.jpg272.2 KB · Views: 69
-
IMG_4693.jpg175.8 KB · Views: 75
Last edited: