Jewell Trigger

Discussion in 'The Basics, Starting Out' started by Troy, Aug 28, 2003.

  1. Troy

    Troy Well-Known Member

    Messages:
    173
    Joined:
    Jun 23, 2001
    Could someone tell which screws are which on a jewell target trigger? Or if someone could email the instructions it would be appreciated.
     
  2. jcpython357

    jcpython357 Well-Known Member

    Messages:
    323
    Joined:
    Mar 12, 2003
    Troy, Cock action, turn screw (1) forward screw, inward until action fires. Back screw out appr. 3/4 turn.
    2. Recock action, turn screw (2), middle screw, out until it contacts tab, thing that surrounds screw 2. While applying pull on the trigger shoe, turn screw inward until action fires. Turn screw in another 1/4 turn.
    3. Recock action and measure pull force. Turn screw (3), one through the trigger(rear) in for more pull force or out for less pull force. Do not exceed specifications for pull settings.
    4. Operate action for your particular method of shooting and adjust as needed. That's it Jay