Can I get a recommendation for a set of rings and bases for a new Winchester EW model 70? I think a Leupold 3-9 VXII will be going on. I like the Leupold bases but there are so many different types. Any advice would be appreciated. Thanks.
Ditto that's the base I used on my M-70.EGW is what I put on that same rifle. The "HD" rings and bases are great. They're a little cheaper at SWFA but you should call to see if they're in stock.
Evolution Gun Works Inc.
Not much really. Any of those recommended will serve the desired purpose. Some just do it for a lot less.what makes a set of bases better than another? Anything wrong with the Leupold bases? Thanks
Can't go wrong with Warne, very strong if weight not a concern. If not needing cant the Talley 1 peice are hard to beat. Lots of great choices, Murphy Precision here on the site is first class as well and will build to your specs. EGW HD are great and there service is as well. Start with what you are looking for then budget.
what makes a set of bases better than another? Anything wrong with the Leupold bases? Thanks
Ditto that's the base I used on my M-70.
The TPS TSR-W wrings are the best value for the dollar as well. I've slowly moved to them for all of my rifles after having such good results with the first couple of sets I tried.
Most likely either will fit the rifle. Remember if you use a rail mount it adds a good bit of height vs standard bases so you don't need to go as tall with your rings.So the TPS rings will work on the EGR base? I like this combo if it works.
Medium or low for a leupold 3-9x 40mm?
Appreciate the help guys.