shootallday
Well-Known Member
So whats you guys loading the 147 eldm, I've got about 50 to mess with. What fps are you running and game kills with them?
all very nice deer, awesome rifle, what stock.59 gr Retumbo, cci 250's for 2910 fps from a 22 inch barrel. Just deer so far, no elk yet. 427 to 849 yards.
What barrel length, I've went up to 59 h-1000 with 140 no pressure with hornady brass but my lot of brass is super soft even 55 was leaving a ejector mark.147 eldm h1000 @57.7 grains in adg brass. 1.5 thou neck tension. Very low sd 3130 fps. Very accurate.
Hornady brass (thinner) can take a little more h1000 to get the same speed.
I haven't seen anything lately, mine are some of the first run but have been fine.Are 147s still having an issue blowing up or did that get resolved ?
My Hornadys seemed to print a little as well even though primer was fine. My barrel I 24" savage tacticalWhat barrel length, I've went up to 59 h-1000 with 140 no pressure with hornady brass but my lot of brass is super soft even 55 was leaving a ejector mark.
I have an older lot of 147s and 1 in 5 disappear from radarAre 147s still having an issue blowing up or did that get resolved ?
these one feel a little loose after the first firing, I only have wlr primers I believe there just a touch smaller the cci or federal. My m18 has Double ejectors so the head gets marked up pretty quick. Hoping next lot of brass is better. I need to try some factory some day to.My Hornadys seemed to print a little as well even though primer was fine. My barrel I 24" savage tactical
I have an older lot of 147s and 1 in 5 disappear from radar
That's moving for a 22"I'm running the 147 eldm at 2990 with 58.3 of n565 and a cci br2 in lapua brass. 2.950 due to box mag. 22" barrel. Just took 2 axis bucks with it at 220 and 300 yards.
I've taken 8 other deer with the factory hornady 147 loads running at 2860 from the same gun. No complaints.