• If you are being asked to change your password, and unsure how to do it, follow these instructions. Click here

Ww - 748 ?

gj

Well-Known Member
Joined
Dec 13, 2003
Messages
306
Location
Idaho
Can any one tell me if this powder is temperature sensitive ?

Low Mild or High sensitivity ?
 
Last edited:
33XPgx3.jpg
 
OK i am a dumass... how do i read this ?

Ok just tell me is it a temp sensitive or temp stable powder?
 
Im guessing the number beside the powder is the degree in FPS per degree change.
I dissagree with a couple of powders on the list in the cartridges ive used them in. ( I've seen more sensitivity with imr4350 vs 7828 but the chart says opposite. )
 
Im guessing the number beside the powder is the degree in FPS per degree change.
I dissagree with a couple of powders on the list in the cartridges ive used them in. ( I've seen more sensitivity with imr4350 vs 7828 but the chart says opposite. )

Ok so some powders have none , so that means they are 100% temp stable?
 
No ,it just means who the hell ever made the list never tested them.
Also a lot of powders are missing.
Temperature sensitivity depends on a lot of things, cartridge used ,percent case density.....
Don't take that list as gospel.
 
Warning! This thread is more than 8 years ago old.
It's likely that no further discussion is required, in which case we recommend starting a new thread. If however you feel your response is required you can still do so.
Top