SOLD/EXPIRED WTT Nightforce 30mm Rings for Nightforce 34mm Rings

Discussion in 'Sold/Expired' started by rangerman, Apr 7, 2015.

  1. rangerman

    rangerman Well-Known Member

    Messages:
    767
    Joined:
    Jul 16, 2007
    I have a like new set of 30mm low Nightforce ultralite titanium rings that I would like to trade for the 34 mm medium 4 screw or 6 screw Nightforce ultralite titanium rings. I also have the upper back ring with level with my rings. I might consider an outright sale if no one has any of the 34mm to trade.
    Thanks,
    Brian
     
  2. Dennis Sawyer

    Dennis Sawyer Well-Known Member

    Messages:
    268
    Joined:
    Apr 2, 2012
    What height are you looking for?
     
  3. rangerman

    rangerman Well-Known Member

    Messages:
    767
    Joined:
    Jul 16, 2007
    As low as I can find which in the Nightforce 34mm will be the medium and are 1.00" in height if I am not mistaken. I have a Ken Farrell 20 moa one piece base that is a little higher at the front than the Nightforce 20 moa one piece base.
     
  4. rangerman

    rangerman Well-Known Member

    Messages:
    767
    Joined:
    Jul 16, 2007
    TTT
     
  5. hodgehodge

    hodgehodge Active Member

    Messages:
    39
    Joined:
    Apr 30, 2008
    How much just to buy the rings ? and what height are they ?
     
  6. rangerman

    rangerman Well-Known Member

    Messages:
    767
    Joined:
    Jul 16, 2007
    I could go $135 plus shipping and they are the low (0.885") height. I also have the Nightforce upper half rear ring level available for an additional $60 if interested. Everything is in mint condition with no scracthes, nicks, or scrapes of any kind on them.
     
  7. Dennis Sawyer

    Dennis Sawyer Well-Known Member

    Messages:
    268
    Joined:
    Apr 2, 2012
    I have a set of 6 screw that I believe are the mediums. They measure .450 from where they meet the rail to the bottom of scope tube.
     
  8. rangerman

    rangerman Well-Known Member

    Messages:
    767
    Joined:
    Jul 16, 2007
    If possible please send pics to : [email protected]
    Also, what measurement do you get from the bottom of the ring where it contacts the rail to the approximate center of the ring.
    Thanks,
    Brian
     
  9. Dennis Sawyer

    Dennis Sawyer Well-Known Member

    Messages:
    268
    Joined:
    Apr 2, 2012
    Emailed picture of them.
    Thx, Dennis
     
  10. rangerman

    rangerman Well-Known Member

    Messages:
    767
    Joined:
    Jul 16, 2007
    Sent you a PM and email Dennis Sawyer.