SOLD/EXPIRED WTS/WTT GRE-'TAN BAT .300 Norma

[nthrut]

WTS/WTT GRE-'Tan .300 Norma Magnum, Fired 25 times, barrel broken in per Greg Tannel's instructions, sub 3/8 MOA load worked up (190 gr Berger @ 3150 fps) 1 loaded round w/ load data furnished. Dies available @ additional cost.
BAT HR Round repeater RB, RP, w/ integral 20 MOA rail, recoil lug, ejector, spiral bolt Serial # RAN007
Bartlein 26" Heavy sporter 5R 1x10 twist barrel, .342 neck, i.e. no neck turn for Norma brass
McMillan Hunter 13.5 LOP stock w/ 2 front stainless studs and rear stud 1" pad epoxy pillar bedded by Greg Tannel
Jewell top mounted safety, trigger set @ 16 oz.
HS Precision bottom metal
Scope and rings not included
Over $4000 invested
$3500 + insured shipping in a new plastic Dockosil case
Cashier's check or MO
Trade value will be $4000. Trying here, before going to my Gunbroker account.
Trade interests + cash: All items must be in least 95+% condition I have access to an FFL, and can buy anything for dealer cost + $25
Pinned, recessed S&W revolvers, will consider others, no autos ( I'm an active member of Gunbroker, S&W, & Colt Forums,i.e., know their value)
SAKO TRG-22
Colt revolvers
Les Baer Pistols
Wilson CQB pistols
Rem 40X rimfires
Anschutz rimfires
Will consider anything of quality, only AR would, possibly, be a Larue OBR

 

[nthrut]

I, also like some Cooper rifles, as a trade interest.
Bob

 

[Chandalar]

pm sent

 

[nthrut]

Pics and phone # sent

 

[nthrut]

Not interested in "parts" configurations of AR's or "heavy" tactical rifles.

 

[nthrut]

Don't want to part w/ brass until rifle is sold. Going to Gunbroker soon.

 

[nthrut]

Moving to Gunbroker in a couple of days.

 

[nthrut]

Moving to Gunbroker later, today.

 

[nthrut]

Moved to Gunbroker, no longer posted here.

 

[nthrut]

Back up for weekend w/ Sako and HS Precision rifles added as trade considerations. Like Coopers, also.

 

[nthrut]

Back up for weekend

 

[nthrut]

Back up for holiday weekend w/ Remington, Sako, CZ factory rifles added as trade options.
Recoil is similar, little bit more than my Gre-'Tan 300 win mag. I built this rifle to be used, out west, for elk and mule deer hunting. I made it weigh similar to a factory Remington rifle, in 300 ultra mag caliber. W/out scope, rifle weighs under 8 lbs. I was going to mount a Z6 Swarovski, that should make the whole rig weigh ~10 lbs ,perfect hunting weight, handling, etc. I don't like heavy rifles, but don't like "ultra lights, either'. This should feel and handle like a Sako or remington magnum rifle, w/ a 26" barrel. I have new brass, Forster dies, shellholder, etc. that I would let go @ my cost, from 2 years, ago. All are new and unused, except for 7 pieces of brass (5 are loaded). This was # 2 run on the reamer from Greg Tannel. My buddy has # 1 run. We both shoot exactly same loads. It was easy to work out w/ 2 different powders. I used his dies. I have a custom sizing die, by Greg Tannel, that goes w/ this rifle( $125), that bumps shoulder back .001" and sizes the neck. I've used 7 pieces of brass, loading numerous times, and primer pockets are still tight. Also, max velocity is achieved w/ a 26" barrel. You have to have @ least 28" barrel w/ an ultramag and primer pockets are loose after 1-2 loadings. .300 Norma is, definitely, a superior, accurate, reloader-friendly caliber.

 

[nthrut]

Back to top

 

[nthrut]

Back up for weekend