Winchester StaBall HD for 28 Nosler.

[timblevins]

Has anyone used Winchester StaBall HD with a 28 Nosler and a 168 gr Cutting Edge bullet? I can't find any data anywhere so far. I'm shooting a Seekins PH 2 and just bought some Cutting Edge 168 gr MTH bullets to try.

 

[idcwby]

This is from Hodgdon's website, should give you a starting point.

 

[timblevins]

View attachment 497256
View attachment 497257

This is from Hodgdon's website, should give you a starting point.

Thanks idcwby. I called Hodgdon this morning and they gave me that same info. I'm loading them up at 75 grains for a start load and will see what I find as I go up. I appreciate your help and will post results after the range.

 

[Brandon.in.parts]

Thanks idcwby. I called Hodgdon this morning and they gave me that same info. I'm loading them up at 75 grains for a start load and will see what I find as I go up. I appreciate your help and will post results after the range.

What were the results with the StaBall HD? I'm looking at loading it in my 28 behind 151gr PVA Cayuga bullets. I'm also going to test it against Retumbo.

 

[timblevins]

What were the results with the StaBall HD? I'm looking at loading it in my 28 behind 151gr PVA Cayuga bullets. I'm also going to test it against Retumbo.

My Magneto3 quit recording and kept giving me error messages so I'm going back to the range after the rains stop and test again. I'll be sure to post all the data as soon as the range opens up.