What neck bushing - 260 Rem Lapua brass

[varmintH8R]

Let me know what size you are using. I know it will vary some....

 

[scottishkat]

Let me know what size you are using. I know it will vary some....

I am rolling the Lapua brass I have in a 292 in my redding right now. I also have a 291 and a 293 because I ran into some issues sizing some Remington brass and I also have multiple 6.5 or .264 caliber rifles.

I did not find a noticeable difference in group size when changing sizes other than one time I had no bullet grip at all with a 293 and rem brass from memory. To quantify I do not shoot 1,000 yards 400 is my longest shot.

You need to do some experimentation different bullet/brass combinations will require a different size. A 292 will usually resize to .293 outside dimension with a little bounce back and a margin of error with my calipers. Factory brass usually comes to our door at .288 or .289. So there are plenty of sizes that will get you to the range.

Good luck and shoot straight.

Bob

 

[varmintH8R]

Exactly what I needed. I really appreciate it.

Brandon

 

[Sargesniper]

292 on Lapua Brass is what I use for my 260 ............... SEMPER FI ... SARGESNIPER