groundhogzapper
Well-Known Member
Thanks so much Jon for getting my 260 here and the attn. to detail you have.
I was a 6BR/PPC shooter for 16yrs except for the last cpl years where I got a chance to ring steel at 1k and further. Thanks to you guys, and hide members for helping me make decisions on my build, and it is a HAMMER! Specs.
700 action, squared up,trued, blueprinted, with a oversize PTG pinned lug, Krieger 1/8.5tw, 24" MTU profile, with M41 Severe Duty Brake, PA Tennalum 20 moa rail, bedded in Dev-con, old style trigger tuned to 2lb, Kampfeld bolt knob, in AICS OD chassis, with NF NXS 3.5-15x50 Velocity 1000 ret MV.5
This load is 139scenar, 45.1gr H4831sc, @ 2820fps. 100yds prone
The stock it was in, cut out by Jon for an MTU contour. Will be for sale.
As she sits now
And what I started with, a good ole 5R 20" with PA M11 Brake
Also my SPS 243, for getting ghogs, in B&C Light Tac stock, painted by me.
Thanks for lookin, and the help, with a special thank you for a member here for a 260 mod case.
I was a 6BR/PPC shooter for 16yrs except for the last cpl years where I got a chance to ring steel at 1k and further. Thanks to you guys, and hide members for helping me make decisions on my build, and it is a HAMMER! Specs.
700 action, squared up,trued, blueprinted, with a oversize PTG pinned lug, Krieger 1/8.5tw, 24" MTU profile, with M41 Severe Duty Brake, PA Tennalum 20 moa rail, bedded in Dev-con, old style trigger tuned to 2lb, Kampfeld bolt knob, in AICS OD chassis, with NF NXS 3.5-15x50 Velocity 1000 ret MV.5
This load is 139scenar, 45.1gr H4831sc, @ 2820fps. 100yds prone
The stock it was in, cut out by Jon for an MTU contour. Will be for sale.
As she sits now
And what I started with, a good ole 5R 20" with PA M11 Brake
Also my SPS 243, for getting ghogs, in B&C Light Tac stock, painted by me.
Thanks for lookin, and the help, with a special thank you for a member here for a 260 mod case.
