jon.henry755
Well-Known Member
- Joined
- Dec 16, 2010
- Messages
- 391
Hi OkieBowie,
You are absolutely correct about the need to align the spines correctly to the nocks you're using. Having access to a good electronic grain scale that will weigh your arrows to at least the 100th column (00.00) is also equally as important.
As Konrad pointed out, maintaining weight consistency between your heaviest and lightest shaft is very important for consistency in long range shooting.
My belief is that most people have a local archery shop that owns or sells arrow spine testers and always has electronic scales. In many cases these local shops are willing to allow their customers to either use the spine tester or most of them will charge a small fee to mark the spines for you, if you provide them with the shafts already taken apart, stripped and cleaned.
It's hard for me to make a hard, fast statement about that because as we know, every shop owner has his own policy's about what they will and won't do, but with a little searching around it shouldn't be to hard to find a reputable shop that will either do it for you or lend you theirs while your in the shop.
The Fletching jig is a different story. In this country Bitzenburger is the 1000 pound Gorilla due to the length of time they've been around and until these new vices were produced the Bitzenburger was thought to be the best we had.
As a manufacture could you imagine having to buy a couple hundred of Dorge's Jigs. The investment would be multiple times what they are currently spending and in the end the manufacture wouldn't benefit financially at all.
This is why accuracy amongst shooters of bows, xbows, rifles or even handguns has always been a very low volume endeavor that is pursued by only a small percentage of the shooting population.
I'm sorry to hear about the illness in your family and hope for a speedy recovery for whomever is not well. When things like that occur the toys need to be put aside for better times.
I'm sure I speak for everybody on this forum when I say that as fellow archer we are here to help anyone who is interested in the sport. When you get back into being able to use any of your equipment, should you have any questions or need any type of help that we can provide, don't hesitate to ask.
Jon
You are absolutely correct about the need to align the spines correctly to the nocks you're using. Having access to a good electronic grain scale that will weigh your arrows to at least the 100th column (00.00) is also equally as important.
As Konrad pointed out, maintaining weight consistency between your heaviest and lightest shaft is very important for consistency in long range shooting.
My belief is that most people have a local archery shop that owns or sells arrow spine testers and always has electronic scales. In many cases these local shops are willing to allow their customers to either use the spine tester or most of them will charge a small fee to mark the spines for you, if you provide them with the shafts already taken apart, stripped and cleaned.
It's hard for me to make a hard, fast statement about that because as we know, every shop owner has his own policy's about what they will and won't do, but with a little searching around it shouldn't be to hard to find a reputable shop that will either do it for you or lend you theirs while your in the shop.
The Fletching jig is a different story. In this country Bitzenburger is the 1000 pound Gorilla due to the length of time they've been around and until these new vices were produced the Bitzenburger was thought to be the best we had.
As a manufacture could you imagine having to buy a couple hundred of Dorge's Jigs. The investment would be multiple times what they are currently spending and in the end the manufacture wouldn't benefit financially at all.
This is why accuracy amongst shooters of bows, xbows, rifles or even handguns has always been a very low volume endeavor that is pursued by only a small percentage of the shooting population.
I'm sorry to hear about the illness in your family and hope for a speedy recovery for whomever is not well. When things like that occur the toys need to be put aside for better times.
I'm sure I speak for everybody on this forum when I say that as fellow archer we are here to help anyone who is interested in the sport. When you get back into being able to use any of your equipment, should you have any questions or need any type of help that we can provide, don't hesitate to ask.
Jon