AJ Peacock
Well-Known Member
338 Allen Magnum (complete setup ready to roll). $6500 + shipping...
Kirby built this rifle a few years ago and it has been an absolute joy to own. I've taken it on 5 hunts and it's 5 for 5.
I've shot it out to 1500+ Yards and it is absolutely unbelievable.
It has around 250 rounds down the tube.
Rifle components:
BAT M 8.5x1.55 Single Shot action
BAT 40 MOA Steel Rail
Jewell Trigger
ADL trigger guard
Lilja Alle32 Barrel (1-10 twist) (Fluted)
APS custom 5 port slab brake.
McMillan A-5 stock (with adjustable comb)
Stainless Steel Pillar bedding.
NightForce NXS 3.5x15 50mm NP-R1 scope
ScopeCoat FlakJacket scope cover.
2 sets NightForce UltraLight Rings
Cosine Indicator
Level Indicator
100 brass (56 loaded) 300SMK @3270 fps
Forster 338 Allen Magnum dies (includes shell holder and 1" spacer if needed for press)
Rod Guide (self made)
Guardforce 62" Aluminum guncase
TacForce padded drag bag (great softcase).
Load Book with all chronograph and load testing data.
All Metal Teflon coated.
The rifle weighs 17lbs 1oz according to my scale without the scope cover or bipod.
This rifle is perfectly zeroed with drops confirmed to 1200yards (I use Shooter android software with 300SMK (Litz) and 3270fps, 2.25' sight height, when used with Barometric pressure etc., it is astounding how accurate this setup is).
I didn't take a picture of the Aluminum case, it's scratched up a little, as it was used when Kirby sent me the rifle and I've used it to haul the rifle out west. I use the drag bag during the hunt, as it's easier than the big hardcase.
Bipod in the pictures is not included.
Kirby built this rifle a few years ago and it has been an absolute joy to own. I've taken it on 5 hunts and it's 5 for 5.
I've shot it out to 1500+ Yards and it is absolutely unbelievable.
It has around 250 rounds down the tube.
Rifle components:
BAT M 8.5x1.55 Single Shot action
BAT 40 MOA Steel Rail
Jewell Trigger
ADL trigger guard
Lilja Alle32 Barrel (1-10 twist) (Fluted)
APS custom 5 port slab brake.
McMillan A-5 stock (with adjustable comb)
Stainless Steel Pillar bedding.
NightForce NXS 3.5x15 50mm NP-R1 scope
ScopeCoat FlakJacket scope cover.
2 sets NightForce UltraLight Rings
Cosine Indicator
Level Indicator
100 brass (56 loaded) 300SMK @3270 fps
Forster 338 Allen Magnum dies (includes shell holder and 1" spacer if needed for press)
Rod Guide (self made)
Guardforce 62" Aluminum guncase
TacForce padded drag bag (great softcase).
Load Book with all chronograph and load testing data.
All Metal Teflon coated.
The rifle weighs 17lbs 1oz according to my scale without the scope cover or bipod.
This rifle is perfectly zeroed with drops confirmed to 1200yards (I use Shooter android software with 300SMK (Litz) and 3270fps, 2.25' sight height, when used with Barometric pressure etc., it is astounding how accurate this setup is).
I didn't take a picture of the Aluminum case, it's scratched up a little, as it was used when Kirby sent me the rifle and I've used it to haul the rifle out west. I use the drag bag during the hunt, as it's easier than the big hardcase.
Bipod in the pictures is not included.
