ICANHITHIMMAN
Well-Known Member
All machine work done by Kevin Cram at Montoure County Rifles
Montour County Rifles
Howa action
27 ½" 1-10 right hand twist, SS, Blackstar barrel (.750/muzzle), no turn neck, .342 neck, zero free bore , fitted with a Reodale precision muzzle break (feels like a 243), (blackstar barrels were know for having exceptional hard steel so barrel life should be increased)
Kirby Allen machined the action to accept a standard long action box magazine. (this really helps with the VLD bullets)
Timney Trigger, Howa standard latching bottom metal.
Nightforce 20MOA base with over sized screws.
The rifle has been coated; in gloss black allumihyde II from Brownells.
I have one go to load for the rifle, 185g VLD (hunting), Nosler Brass, 81g H1000, CCI BR2 primer. I moves along at 3030 FPS, prints less than an inch at 200m and seams fairly spot on with my shooter app. I don't have a lot of rounds down the bore, but enough to know I am taking a huge loss (Less than 300). I did an overly anal bore break in with one shot and clean for 30 rounds then to 3 shots and 5. I have never let the barrel get hot, never fired more than 3 rounds at time.
Included with the price are going to be 4 boxes of Nosler brass, and 123 pieces of once fired Federal GMM (from another rifle), and the Honrnady New dimension dies.
Asking 1700$ or trades for other bolt guns or glock frams
Montour County Rifles
Howa action
27 ½" 1-10 right hand twist, SS, Blackstar barrel (.750/muzzle), no turn neck, .342 neck, zero free bore , fitted with a Reodale precision muzzle break (feels like a 243), (blackstar barrels were know for having exceptional hard steel so barrel life should be increased)
Kirby Allen machined the action to accept a standard long action box magazine. (this really helps with the VLD bullets)
Timney Trigger, Howa standard latching bottom metal.
Nightforce 20MOA base with over sized screws.
The rifle has been coated; in gloss black allumihyde II from Brownells.
I have one go to load for the rifle, 185g VLD (hunting), Nosler Brass, 81g H1000, CCI BR2 primer. I moves along at 3030 FPS, prints less than an inch at 200m and seams fairly spot on with my shooter app. I don't have a lot of rounds down the bore, but enough to know I am taking a huge loss (Less than 300). I did an overly anal bore break in with one shot and clean for 30 rounds then to 3 shots and 5. I have never let the barrel get hot, never fired more than 3 rounds at time.
Included with the price are going to be 4 boxes of Nosler brass, and 123 pieces of once fired Federal GMM (from another rifle), and the Honrnady New dimension dies.
Asking 1700$ or trades for other bolt guns or glock frams
