86alaskan
Well-Known Member
Up for sale, my very nice semi-custom 284 WIN 110.
The action....
-110 flat back staggered feed, polished feed lips on mag box
-Rifle Basix SAV-1 trigger
-Fluted bolt with Glades Armory extended bolt handle
-Duracoat Green, can't remember what color
-20moa picatinny rail, cut off at front of action to allow barrel change without pulling rail
Barrel....
-284 WIN Match chamber from NSS, 1-9" twist 28" SS
-NSS precision barrel nut
-NSS precision ground recoil lug
-threaded 9/16-24 with seamless SCHULER muzzle brake
Stock.....
-Choate tactical LA
-hydrodipped Kryptek MANDRAKE
-simple bedding job, could be improved upon
-2 screw on cheek pieces from choate
This rifle has been a great shooter but I just haven't used it enough to keep. Too many irons in the fire. So, it's gotta go to pay for another project.
I've done very little load development, but basically everything through it from 140gr VMAX, 162gr AMAX, and 180gr Berger target shoot into less than MOA,
often far less. I've had good luck with the beginning stages with the 180gr target and H4831sc/RL17.
I'd like to see $1100 for the whole rifle shipped to your chosen FFL. I have Lapua necked up 6.5-284 brass and redding bushing dies with bushings available to the buyer first. PM any questions, open to trades for high end hunting optics. Thanks for looking.
The action....
-110 flat back staggered feed, polished feed lips on mag box
-Rifle Basix SAV-1 trigger
-Fluted bolt with Glades Armory extended bolt handle
-Duracoat Green, can't remember what color
-20moa picatinny rail, cut off at front of action to allow barrel change without pulling rail
Barrel....
-284 WIN Match chamber from NSS, 1-9" twist 28" SS
-NSS precision barrel nut
-NSS precision ground recoil lug
-threaded 9/16-24 with seamless SCHULER muzzle brake
Stock.....
-Choate tactical LA
-hydrodipped Kryptek MANDRAKE
-simple bedding job, could be improved upon
-2 screw on cheek pieces from choate
This rifle has been a great shooter but I just haven't used it enough to keep. Too many irons in the fire. So, it's gotta go to pay for another project.
I've done very little load development, but basically everything through it from 140gr VMAX, 162gr AMAX, and 180gr Berger target shoot into less than MOA,
often far less. I've had good luck with the beginning stages with the 180gr target and H4831sc/RL17.
I'd like to see $1100 for the whole rifle shipped to your chosen FFL. I have Lapua necked up 6.5-284 brass and redding bushing dies with bushings available to the buyer first. PM any questions, open to trades for high end hunting optics. Thanks for looking.
